Hot-dip GI coil and sheet for roofing, cladding, and fabrication — confirm grade, Z coating, thickness, width, and packing before RFQ.
| Property | Value |
|---|---|
| Product | Hot-dip galvanized steel coil / sheet (GI) |
| Coating mass | Z40–Z275 (G30–G90 class options by order) |
| Толщина | 0.12–4.0 mm |
| Ширина | 600–1500 mm |
| Surface / spangle | Regular / minimized / zero spangle; skin-pass optional |
| Surface treatment | Chromate / Cr-free passivation / oiled / dry |
| Steel grades | DX51D+Z, DX52D+Z, SGCC, S250GD+Z, S350GD+Z, ASTM A653 CS |
| Standards | ASTM A653, EN 10346, JIS G3302, GB/T 2518 |
| Coil ID | 508 mm / 610 mm |
| Coil weight | 3–12 t (customizable) |
| QC checkpoints | Base thickness, width, zinc coating mass, surface condition, and adhesion or bend checks when the order requires them |
| Packing orientation | Eye-to-sky or eye-to-wall after coil weight and handling method are agreed |
Hot-dip galvanized (GI) coil and sheet for roofing, cladding, ducting, and fabrication. Specify coating mass, grade, and surface on the RFQ. Need narrow widths? Order slit strip from the strip family instead of a duplicate GI SKU. Downstream color-coated demand should move to the PPGI / PPGL hub with paint system and RAL. Comparing Al-Zn service life? Open the GL family and GI vs GL buyer guide before locking the PO.
Write surface, profile, and strip width into the RFQ and tools—not extra near-duplicate product pages.
RFQ documents & delivery
Packing, MTC, and inspection path — include them in your RFQ for an actionable quote.
Agree the PO or ITP checkpoints before production. Applicable GI checks cover base thickness, width, zinc coating mass, surface and spangle condition, plus adhesion or bend performance when the forming route requires it. Document type, sampling and acceptance limits remain order-specific until approved records are on file.
Representative export packing and loading evidence. Final packing follows the approved order.
Supply confidence
Fixed delivery proof plus this product’s applications — confirm stock, inspection, and end use before RFQ.
Strapped coils and plates staged by lot so grade, thickness, and destination port can be matched quickly for shipment.
Overseas buyers and third-party inspectors are welcome to verify specs, heat numbers, and packing. SGS/BV support available.
Typical uses for this product: Roofing and wall-cladding roll forming; HVAC ducting and cable-tray fabrication; General sheet-metal fabrication and formed components. Share your end use, environment, and packing needs in the RFQ.
FAQ
Z275 is a coating-mass designation used with the governing product standard. State the standard and designation together because reporting basis and tolerances must follow that document and the accepted order.
Use the strip family when the finished slit width, width tolerance, edge condition or narrow-coil packing is a purchasing requirement. Use this page for full-width coil or cut sheet.
Match regular, minimized or zero spangle and passivated, Cr-free, oiled or dry treatment to appearance, forming and storage needs. Put the selected combination on the RFQ and PO.
Agree dry handling, passivation or oil where applicable, moisture-barrier wrapping, edge protection, storage conditions and destination climate before packing release. No packing duration is guaranteed without an approved order basis.
Confirm with sales against grade, coating mass, dimensions, coil weight, quantity and the current production schedule. This page does not publish an unconditional MOQ or lead-time promise.
Related products
Continue with sibling coated families — not thin near-duplicate SKUs.
750 / 840 / 900 / 1050 mm… · Sheet
Product family
Browse more products in the Оцинкованная и покрытая сталь product library, or send this product as a quote preset.
Запросить техническое КП
Talk with our team about Hot-Dip Galvanized Steel Coil / Sheet (GI) Z40–Z275 availability, dimensions, and shipment timing.
